Page 1 of 4 123 ... LastLast
Results 1 to 10 of 37

Thread: TVSuite Version 5, Beta Build 5.3.80.760a

  1. #1
    Join Date
    Feb 2004
    Posts
    12,043
    Blog Entries
    7

    Default TVSuite Version 5, Beta Build 5.3.80.760a

    Please post your functional issues here on the message board. However upgrade and key issues should be emailed directly to us via email at support. AT videoredo.com
    PLEASE, DON"T POST ANY KEYS IN THE FORUM!

    Download link: www.videoredo.net/beta/VRDTVSH264-5-3-80-760a.exe

    TVSuite V5 - 5.3.80.760 (Released 2017-12-08)
    =============================================
    [Fix] DVD/MPEG encoding: Revert to build 748 MPEG2 encoder for software encoding due to speed and bit rate compliance of ffmpeg.
    [Fix] Video driver: At install, automatic selection of EVR for Windows 10, VMR9 for Win 7/8, and VMR7 for XP wasn't working correctly.

    TVSuite V5 - 5.3.80.759 (Released 2017-11-22)
    =============================================
    [Change] Ouput status: 10-30 second delay displaying the initial output status dialog in Win 10 Fall Creator's update.
    [Fix] TS Files: Not detecting audio streams when coded as private PES-1 PMT descriptor, due to VRD ITV hack from 2009.
    [Fix] TS Muxing: H.264 output, fix in 757/758 could cause buffer overflow if the vbv buffer size decreased in the middle of file.
    [Fix] DVD authoring: Average bit rate about 6% high when using ffmpeg mpeg2 encoder. Can make DVD folder too large.
    [Fix] AAC Audio: Problem parsing the AAC header from an MP4 file, especially with Version 2 audio description.
    [Fix] Titling: Adding a title and having an output frame rate different from the source video causes hang or audio resync adds.
    [Enhancement] LXF: (VRDPro) support for LXF output with HD captions and PCM audio.
    [Fix] x264 encoder: (VRDPro) option to force enabling the HRD parameters wasn't working.
    [Fix] GXF files: (VRDPro) original PTS values calculated incorrectly for 720p files.


    TVSuite V5 - 5.3.80.758 (Released 2017-10-29)
    =============================================
    [Change] TS Muxing: H.264 output, In TVSuite, set the buffers exit rates at the mux rate to avoid PTS underflows.
    [Fix] File open: Improved ESReader to give fewer false positives of H.264 streams.
    [Fix] File open: Moved the ESReader to be last in line for file checks to prevent false positive elementary stream warnings.
    [Fix] GUI: Custom buttons, reset to default did not work on all 6 controls, only the 1st one.
    [Fix] GUI: Find tune slider is assuming right button is pressed instead of left button.
    [Fix] GUI: German, cleaned up Tools>Options dialog positioning.
    [Fix] Output Aspect: 720x576 SAR calculation not being rounded correctly showing 1.775 instead of 1.7778.
    [Fix] Output Profiles: On Advanced tab in TVSuite V5, "Watermarking" options should not be displayed, it's for VRDPRO only.
    [Fix] Output: Saving each scene as separate file doesn't work with elementary stream output.
    [Fix] TS Muxing: H.264 output, fixed TS muxer to re-set the buffer timings on each GOP in case profile / HRD params change.
    [Fix] Titling: Titles audio incorrect frame duration when changing audio sampling rate of the source file.
    [Fix] Video display: Application could crash if source dimensions were 720x486 but decoded as 720x496.
    [Fix] ANC captions: (VRDPro) ANC caption to user data conversions didn't work if also doing a frame rate change.


    TVSuite V5 - 5.3.80.757 (Released 2017-09-25)
    =============================================
    [Enhancement] H.264: Will now open incorrectly formatted HD-PVR files that wouldn't open in previous versions.
    [Enhancement] COM: Add new COM call, NavigationFrameAdvancedIFrame( BOOL bForward).
    [Enhancement] ES Muxing: Add option in the ES muxing dialog for the video frame rate when the frame rate isn't in the video stream.
    [Enhancement] ES Muxing: Added support to mux video only, using silent PCM audio.
    [Enhancement] GUI: Gracefully edit videos with multiple dimensions. Shift+Tools>Options # 40: Allow multiple video dimensions
    [Enhancement] MPEG2: Added support for AAC LC audio with MPEG2 video when using MP4/MOV container.
    [Enhancement] Output profiles: Option to group profiles by container and codec.
    [Change] ES Muxing: Updated the H.264 elementary stream detection to require a SPS, PPS, and not require multiple AUDs.
    [Change] GUI: Add "disable" option to check for update frequency on the Tools>Options>Startup page.
    [Change] GUI: Allow dimension changes from 1080 to 1088 without triggering a warning.
    [Change] GUI: Diagnostic level now defaults to "medium" on Tools>Options>General
    [Change] GUI: When showing can only be opened in VideoReDo Pro, display a "more information link".
    [Change] H.264 MP4/MKV: Arbitrate frame rate by looking at PTS values when the video ES has a different frame rate than the file header.
    [Change] HEVC/H265: Add warning when the user tries to open an HEVC/H265 file.
    [Change] Output Profiles: When grouping option is "none", change "Check/Uncheck group" to "Check/Uncheck All" and enable.
    [Change] TS Muxing: Auto mux rate was not taking into account the bit rate of non-recoded secondary audio streams.
    [Fix] Ad-Detective: If source is H.264 and "Disable Display Update" in Ad-detective params is checked, batch ad-detective can hang.
    [Fix] Ad-detective: Interactive tab not showing in ad scan params
    [Fix] Audio playback: 8K sampling rate audio doesn't play properly with the DirectSound driver for H.264 files.
    [Fix] Audio: AAC-LC with sampling rate of 24 KHz mistakenly detected as AAC-HE.
    [Fix] Captions: Changed caption header market bit from 0 to 1 in H264 SEI captions.
    [Fix] ES Reader: Tighten check for H.264 videos to prevent MPEG2 program streams being interpreted as H264 ES streams.
    [Fix] File open: MP4/QT file accidentally as a transport stream, failed to open.
    [Fix] GUI: Czech translation, Tools>Options>Playback, EVR video driver option is labeled as duplicate VMR7.
    [Fix] GUI: Error message when joining files with different video codecs incorrect. Missing a '%s'
    [Fix] H.264: Improved sync adjustment when there is missing audio and all video frames are reference frames.
    [Fix] Intel QuickSync: Output profile advanced, GOP size and IDR frequency weren't working.
    [Fix] MP4: Added support for for opening MP4 files with header blocks (zlib support)
    [Fix] Output Profile: German translation for output profile encoder drop down was incorrect preventing Quick Sync (TVSuite)
    [Fix] Output Profiles: Prevent 2 pass encoding when using Intel QS encoder.
    [Fix] Output: Rotation would cause crash if source chroma is 4:2:2 and output chroma is 4:2:0.
    [Fix] Output: Deinterlacer not functioning properly after using new multi-threaded calls.(broke in 750)
    [Fix] Prevent 422/444 with QS encoder
    [Fix] Profile editing: If profile list is grouped, importing a profile doesn't show the new profile until you change the grouping.
    [Fix] Uncompressed: Frame rate of 59.94 incorrectly set as 29.97
    [Fix] XML Parser: Possible crash if trying to open or test an XML file larger than 2GB.
    [Enhancement] Canoe CSV: (VRDPro), when opening a Canoe project look for matching .ts in addition to a matching .mpg
    [Enhancement] Deinterlacing: (VRDPro & Transcoder), If system has 4-7 cores, using 2 deinterlacing threads, if 8+ cores, 4 threads.
    [Enhancement] GUI: (VRDPro) Added pts jitter, difference between actual and calculated PTS value, to the stream internals GOP graph.
    [Enhancement] Help: (VRDPro) add link in help menu to VideoReDo Pro application notes.
    [Enhancement] Watermarking: (VRDPro) Added support Teletrax watermarking.
    [Change] H.264 MXF: (VRDPro) When opening an H.264 MXF file automatically override aspect ratio from MXF container if present.
    [Change] MXF Output: (VRDPro) Added support for MPEG2 4:2:0 output with profile/level: High@Main and High@High.
    [Change] Time display: (VRDPro) On Tools>Options>Navigation, change NPT check box to drop down:
    [Fix] LKFS calculation: (VRDPro) Fixed LKFS setting for non-gated algorithms, BS-1770-3-10 second.
    [Fix] LXF: (VRDPro) Fixed problem with audio / video sync when there is pre-roll.
    [Fix] MXF: (VRDPro) AAC audio in an MXF wrapper, gives multiple audio frame errors due to excess filler.
    [Fix] Prores: (VRDPRO) Converting ANC captions to user data causes GPF.
    [Fix] x264 encoding: (VRDPro) CRF setting on Advanced H.264 tab wasn't working, was always defaulting to 23.

    TVSuite V5 - 5.1.3.746 (Released 2016-10-10)
    ============================================
    [Enhancement] Ad-Detective, add button to load or save Ad-Detective parameters.
    [Enhancement] Captions: (VRDPro) Support converting EIA_608 captions in an MP4 to user data.
    [Change] H.264: Aspect ratio could be off due to SAR rounding error.
    [Change] H.264: Improperly encoded SAR setting with aspect ratio of 0:0 causes H.264 encoder validation error when doing a cut.
    [Change] TS Output: Rolled back the improved buffer management from build 745 if not outputting null packet. Speeds up VLC opens.
    [Fix] Batch: Ad-Detective will honor interactive vs output based Ad-Detective option.
    [Fix] GUI: If YUV acceleration is off, 1912x1070 video would crash during RGB conversion.
    [Fix] GXF/LXF: (VRDPro) Intermittent seeking issues with GXF/LXF files.
    [Fix] H.264 files: Sync issue when a large GOP starts with IDR and rest of GOP are I-Frames that aren't used as references.
    [Fix] Joiner: Output not clearing output complete dialog resulting in statistics showing from previous joins.
    [Fix] MPEG2 navigation: Fixed rare problem with frame accurate navigation of transport stream (and Tivo TS) files.
    [Fix] Output: If profile is "Match source" and source is not MPEG2 or H.264, would error, now recodes to H.264.


    TVSuite V5 - 5.1.3.745 (Released 2016-09-15)
    ============================================
    [Enhancement] Ad-Detect: Added option for long silent audio (<-65 dBFS) to be flagged as an advert.
    [Enhancement] Ad-Detect: Option to use the audio channel count as part of the ad-detection algorithm.
    [Enhancement] Add option to turn on Plot Mask by default
    [Enhancement] Audio stream selection: Added language code to Tools>Select Stream>Audio
    [Enhancement] Output complete: Add actual output duration, output file size, and number of scenes
    [Enhancement] Output profile: Added "Primary audio" selection in advanced audio profile so user doesn't need to know a specific stream number.
    [Enhancement] Title dialog: Moved title fade duration to main dialog rather than use separate dialog invoked by a non-obvious menu option.
    [Enhancement] Use longest file for metadata on all files types, not just MCE
    [Enhancement] Video display: Detect if source video is rotated and display correctly (MP4 files).
    [Enhancement] Ability to save each scene to a separate output file.
    [Change] GUI: If drag/drop multiple files, the combine / join / dvd dialog can be hidden by windows from other applications.
    [Change] Joiner: New option in joiner edit dialog to clear the joiner list after a joiner save.
    [Change] MP4 output: If source is PCM and audio is "Automatic", auto recode to AAC. For PCM set codec to PCM or mux format to MOV
    [Change] MP4: Detect rotation metadata value, and load into video stream parameters. Report in Tools>Show Program Info.
    [Change] MPEG2 output: MaxGop without header bit rate change would set header bit rate to 10 Mbps unless TS. Now checks for PS or DVD
    [Change] Output profile: Add new option to rotation setting to auto rotate so that output video is upright.
    [Change] Output profile: Intelligent recode, Bit rate presets, added 4K average and max bit rate. 1080 labeled now as both 1080i/p.
    [Change] Output profile: Move "Convert all I-frames to GOPs" from Advanced>Program stream to MPEG2 stream.
    [Change] Output profile: Move "Dropframe timecode in GOPs" from Advanced Program Stream to MPEG2 Stream.
    [Change] Output profile: Move "Set header to video bitrate" from Advanced > program stream options to MPEG-2 stream options
    [Fix] Ad-detective scan: New Ad-detective now process entire file and replaces any existing cuts / scenes.
    [Fix] Audio: PCM audio ingest sampling rates currently limited to 96K, 48K, 44.1K, 32K. Added ingest support for 24K, 22.5K, 11.025K
    [Fix] Avermedia: Not detecting the faulty AverMedia encoding in AVI files resulting in wrong frame rate.
    [Fix] COM: Loading a file via COM with QSF flag set would always return "false" even if file was loaded.
    [Fix] H.264 output: Fixed buffer timing for H.264 streams with HRD bit_rate_value
    [Fix] H.264 output: Pixelation when cutting on an I-frame when file contains both I and IDR frames.
    [Fix] H.264: Unable to open file smart edited by VRD using IDR cut if the SEI precedes the SPS in the original file.
    [Fix] IFO file open via drag: Opening a DVD file via file open gives an incorrect error message.
    [Fix] Joiner: Joiner>Create video from joiner list, will now only be enabled if there's an actual video project in the joiner list.
    [Fix] MP4/MKV: Correctly handle videos that start with negative PTS values.
    [Fix] MP4: Audio detect rotated videos, display the video upright and auto transcode to upright on output unless intelligent to mp4.
    [Fix] MPEG2 Output:Encoding MPEG2 to 4K would crash, now limits to 1920x1080.
    [Fix] Output profile: If target file size is 0, default to minimum settings, 1 Mbps for MPEG-2 and 0.5 Mbps for all other codecs
    [Fix] Output profile: If using Intelligent mode "quality factor" and source isn't MPEG2 or H.264 auto switch to bit rate mode.
    [Fix] Output profiles: Progressive sequence flag not being set when converting 1080i to 720p with BOB deinterlacer.
    [Fix] TS Muxing: H.264 TS muxing, improve calculation for the VBV site so that it uses both profile and level.
    [Fix] TS Muxing: Improve initial PCR value and properly set the max duration allowed in the ES (decode) buffer.
    [Fix] WTV files: Fall back to ffMpeg reader for WTV files that won't open with our standard reader.


    TVSuite V5 - 5.1.2.743 (Released 2016-06-02)
    ============================================
    [Enhancement] Check for HE in AAC frames with ADTS
    [Enhancement] GUI: New Tools> UI Style editor, to change the skin colors and fonts on the main screen.
    [Enhancement] Install wizard: New install wizard starting with build 742.
    [Change] GUI: User's used to Ctrl+Q to select stream didn't realize that it's been changed to a menu option, issue informative warning.
    [Change] IFO open: Changed way we stored stored "Auto QSF" parameter in the registry. (Internal fix).
    [Change] Licensing: False positive for license violation on a couple German systems. Fixed in 740d. More fixes in 742.
    [Change] MPEG2 Output: (VRDPro) when recoding HD CBR at low bit rates, too large a VBV would trigger ffMpeg to switch to VBR.
    [Change] MPEG2 output: (VRDPro) Profile setting to insure that all frames have user data captions.
    [Change] TS Muxing: Teletext frames can overflow the packet buffer when video is removed but teletext data isn't.
    [Fix] Convert ANC captions to user data: (VRDPro) Doesn't work when source and output codecs are different.
    [Fix] DVD Options: Removed hidden option "Direct to VIDEO_TS" from output folder on the Tools>Options>DVD.
    [Fix] GUI: Buttons on main screen have no text when font set to MS Sans Serif
    [Fix] GUI: Fine Tune Slider not working properly
    [Fix] KeySearch database: (Private) Can't have single quotes in the inactive reason. Didn't check comments, might be there too.
    [Fix] MKV file: Sporadic crash when opening some MKV files[Fix] MP4/MKV output: Last subtitle being output could cause a crash.
    [Fix] MP4/MKV: Application crash if s+T>O # 54, Frames to check for variable frame rate non-zero.
    [Fix] MPEG2 Output; Might throw an exception / failure if first GOP is closed and only has less than 3 frames.
    [Fix] TS Muxing: H.264 TS muxing could fail is SPS VBV size is less than 500,000 bytes.
    [Fix] TS Muxing: H.264 TS muxing would fail is SPS has VUI parameters, but the HRD block is empty.
    [Fix] Time code entry: Allow ";" between seconds and frames, i.e. hh:mm:ss;ff.
    [Fix] Title editor: Inconsistent 4K support & fonts too small. Fonts sizes will now auto scale at HD and 4K sizes.

    TVSuite V5 - 5.1.2.740
    (Released 2015-12-19)

    ============================================
    [Fix] DV: Field order incorrect when reading SD DV files.
    [Fix] Preview mode: MPEG2 audio might not play in preview, if there are more than 1 audio stream. Broken in 738/739.
    [Fix] SMPTE-302M: (VRDPro) Channel 2 was not being output correctly when encoding at 16 bits.

    TVSuite V5 - 5.1.2.739
    (Released 2015-11-09)

    ============================================
    [Enhancement] Batch: Add a Tools>Options>Batch option to terminate batch when the queue is empty for xx minutes.
    [Enhancement] Batch: New option when adding a file from within batch: "Match source format" (SAS) to let VRD choose the output profile.
    [Enhancement] Batch: New pencil icon allows editing of output folder and profile of a previously queued batch item.
    [Enhancement] GUI: Charm bar can be customized using T>O>Charms. Additional charms available, charm text can be customized.
    [Change] Batch: Add option to batch to run VRD visible rather than silent. Will be a big help for debugging.
    [Change] Crop/Resize: Change the default border value from x000000 to x101010 (studio black).
    [Change] DVD burning: Add option to Tools>Options>DVD to search for DVD on A and B drive letters.
    [Change] MPEG2: When recoding, change the default max VBV buffer size to 9.7 Mbps for 4:2:0 and 12.2 Mbps for 4:2:2
    [Change] Output profile: Expand manual gain reduction from -32 db to -96 db in the profile so that a track can be silent.
    [Change] Output profiles: Changed output profile frame rate selection. Removed "SD", added "Automatic".
    [Fix] EAC3: Audio decoder could cause a buffer overflow when playing files with EAC3 audio.
    [Fix] Batch: Automatic sort by date in batch not working
    [Fix] ES muxing: Dragging an MPEG-2 ES stream would throw an error rather than launching the ES muxer.
    [Fix] H.264: Problems opening an AVI x.264 file with Annex B start codes if it starts with a large SEI created by the X.264 encoder.
    [Fix] MPEG2: Preview mode crashes. (Broke in 738)
    [Fix] PS muxer: Rare buffer overflow when creating an MPEG-2 program stream.
    [Fix] Quick Sync: 1080i converted to 720p with the QuickSync encoder was not being correctly flagged as progressive.
    [Fix] TS Muxing: Tightened up muxing parameters for MPEG2 720p file to create more compliant muxes.
    [Fix] TS Muxing: Updating an MPEG2 bit rate in the sequence header wasn't correctly updating the exit rate of the video mux buffer.
    [Enhancement] GUI: (VRDPro) In the advanced audio mixing dialog. Double clicking on a process or output stream selects and edits it.
    [Enhancement] MXF reader: (VRDPro) Correctly handle MXF files where initial DTS is negative.
    [Enhancement] Audio meters now functional.
    [Change] SMPTE-302M: (VRDPro) Added framing bit to mark beginning of each 192 sample frame.
    [Fix] SMPTE-302M: (VRDPro) Fixed TS muxer bit rates to create more compliant 302M muxes.


    TVSuite V5 - 5.1.2.738 (Released 2015-11-09)
    ============================================
    [Enhancement] GUI: Tools>Options>Startup, new option to change the name and location of the custom output profiles file.
    [Enhancement] DV Video: (VRDPro) new DV trimming option to trim DV segments.
    [Enhancement] GUI: (VRDPro) VRDPro only options consolidated into single category on Tools>Options.
    [Change] Crop/Resize: Changed internal logic for automatic pillar/letter boxing on aspect ratio change.
    [Fix] Output: Primary audio stream not in output, if user unchecked "allow multiple audio streams" (broke 737)
    [Fix] H.264: Unable to open SmartyCam files. Files use pic ordering type 2, but don't have IDR frames, only I-frames.
    [Fix] MKV: File wouldn't open if container time stamp corrupt. This prevented QSF.
    [Fix] DVD authoring: Would force a video recode on 29.97fps video
    [Fix] GUI: Audio wave form not displayed
    [Fix] Audio output: Output could hang if normalizing and changing the number of audio channels.
    [Fix] GUI: (private) Print reason why activation check failed.
    [Fix] MPEG2: Cuts in very low bit rate files could create macroblocked images. Minimum encoding bit rate not being honoured.
    [Fix] Output: (VRDPro) When recoding to 720x608, we were automatically adding VBI signal. Remove, only do so if recoding to 720x512.
    [Fix] Output: Output could rarely include an extra frame in cut mode due to round off error when converting cuts to scenes.

    TVSuite V5 - 5.2.2.737
    (Released 2015-10-02)

    ============================================
    [Change] TS Output: If "Use PIDs from source file" is Yes, then copy AC3 and DVB component tags from source PMT.
    [Fix] GUI: Batch "Add files to batch queue" profile drop down list only showing single item and missing icons (Broke in 736)


    TVSuite V5 - 5.1.2.736 ( Released 2015-09-28 )
    ============================================
    [Enhancement] Audio stream selection: Removed Tools>Select stream. Audio stream now selected directly from Tools menu, doesn't re-open file.
    [Enhancement] DV Video: (VRDPro) SMPTE-436m captioning supported for DV video in an MXF wrapper.
    [Enhancement] Output profile: (VRDPro) MXF output is supported. Currently OP1A only.
    [Change] Chapter markers: On Tools>Options>Chapters page, default "enabled": Scene markers and cut points. (new installs)
    [Change] H.264 navigation: Improved navigation / seek speed for files with very long GOPs ( > 5 sec / GOP).
    [Change] MP4/MKV output: Changed internal buffering class to a more efficient container.
    [Change] MPEG2: Not displaying B frames due to ignore-able encoding error.
    [Fix] AAC audio: AAC-HE audio with implicit signalling wasn't always detected correctly.
    [Fix] Audio output: (VRDPro) audio mixer could hang output graph because it wasn't resetting source frame PTS correctly at cuts.
    [Fix] Audio output: (VRDPro) audio mixer could hang the output graph at end of file due to race condition checking read threads.
    [Fix] Audio output: Re-sampling from 44.1Khz to 48Khz could hang output depending on the location of the cut points.
    [Fix] DV Video: DV file being mis-interpreted as MPEG2.
    [Fix] DV Video: DV file causing crash on open, being mis-interpreted as an MPEG2 PS.
    [Fix] DV Video: DV file in an MXF wrapper is getting assigned the GENERIC ffMpeg type instead of MXF ffMpeg type.
    [Fix] GUI: Windows 10, controls overlapping on Tools>Options>Navigation page.
    [Fix] H.264 playback: If video fell behind audio frames dropped to maintain sync, but drop option not cleared once back in sync.
    [Fix] H.264: Allocated too much memory for PCM buffers when source is H264.
    [Fix] H.264: For Avermedia captured files, widen the parameters to auto correct the frame rate from 59.94 to 29.97
    [Fix] LKFS normalizing: (VRDPro) can crash if source audio codec is AAC 2.0.
    [Fix] MP4/MKV output: Improved handling of H.264 files when the DTS/PTS relationship changes in mid file.
    [Fix] WMV audio decoding: ffmpeg audio decoding could drop most audio frames when using wmv voice codec.
    [Fix] x264 encoding: (VRDPro) Progressive sequence not being set in all cases.


    TVSuite V5 - 5.1.2.734 (Released 2015-07-22)
    ============================================
    [Change] GUI: Added "auto" to S+T>O # 51 to enable the ffMpeg libraries determine the optimal threading based on the source codec.
    [Fix] H.264: Unable to determine clock preventing file open if field encoded and temporal references (POC_lsb) are odd.
    [Fix] Quick sync: Error check from encoder wasn't skipping negative error codes resulting in rare crash.
    [Fix] Uncompressed video: Spurious EOF returned in middle of the file triggers a decoder reset resulting in corrupt GOP.
    [Fix] H.264 output: Adding a leading title could trigger a crash. (Broken in 731).
    [Fix] TS Muxer: Muxer would not retain same as source PIDs when source had multiple audio streams.
    [Fix] H.264: Seek problems and application could hang due to revised buffer management (broke in 733).
    [Change] H.264: (VRDPro) Added reporting of AFD code on Tools>Show Program Info when AFD is in an SEI block.
    [Fix] Profiles: (VRDPro) allow 4K 3840x2160 video resolution in the profile grid.


    TVSuite V5 - 5.1.2.733 (Released 2015-07-16)
    ============================================
    [Enhancement] Vlist combine: If file list contains a file with a .rec or .trp extension it will be the first file in the .VLst rather than the last.
    [Critical Fix] Authoring DVD from Batch will crash
    [Fix] AAC audio: Fixed demuxer to handle very short ( <16 byte) AAC frames.
    [Fix] Frame rate change: Frame rate change can trigger sync issue or dropped audio frames if interlaced source switches field cadence.
    [Fix] GUI: When saving via the joiner, the default output profile should be based on the joiner output, not the file open in VRD.
    [Fix] H.264 output: H.264 decoder outputting duplicate IDR frame when previous frame is an I - frame.
    [Fix] H.264: Better detect topfield / bottom field flag if frame is interlaced and pic_struct is missing. Reduces field on recode.
    [Fix] H.264: File with 10 second GOPs isn't increasing minimum buffer sizes automatically.
    [Fix] MPEG: Insert an extra MPEG1 Layer 2 audio frame at start of file during playback with very high bit rate (35 Mbps) MPEG2 TS.
    [Fix] Playback: Unable to display video if encoded display width is not a multiple of 4.
    [Fix] ffMpeg: Memory leak when saving H264 MP4 or MKV files.
    [Enhancement] SDI output: (VRDPro) Added T>O>SDI, audio playout option: none, all, primary, primary + matching codecs
    [Fix] H.264: (VRDPro) Stream internal display shows incorrect GOP flag when POC_type = 2, there are embedded I frames with SPS/PPS.


    TVSuite V5 - 5.1.2.732 (Released 2015-06-20)
    ============================================
    [Enhancement] Captioning: Added 608/708 caption preservation when re-coding to H.264 using Intel QuickSync.
    [Enhancement] GUI: Czech and Russion translations added.
    [Enhancement] Output: Improve conversion of 25i/29.97i to 50p/59.94p. Select Interlacing: Auto or BOB.
    [Enhancement] Profile: New option "Force interlace". Profile dialog changed from "Deinterlace mode" changed to "Interlacing"
    [Enhancement] Profile: To better quality when converting 720p to 1080i by interlacing successive frames rather than dropping every other frame
    [Enhancement] Video only: Support for files that don't have any audio tracks. Works with MP4, MOV, MKV, etc. Not ES, PS, or TS.
    [Enhancement] Vlist combine: If file list contains a file with a .trp extension it will be the first file in the .VLst rather than the last.
    [Change] Audio: Added support for ingesting PCM audio with sampling rates of 22,050 / sec.
    [Change] GUI: Resized the Tools>Options window to fit more options on the left without scroll bars.
    [Change] MP4 muxing: When recording to H.264 (at 1080i), MediaInfo reported variable frame rate instead of constant.
    [Fix] Audio output: Audio with sampling rate of 22.05 Kbps was being treated as no audio found.
    [Fix] Captioning: 608/708 captions corrupted on re-code to H.264 when source is 720p and source has repeat frame flags.
    [Fix] DV video: Not picking up the correct field order for DV and DVPro video.
    [Fix] H.264 Smart edit: Possible stall when joining files if the SPS picture order type switches from 0 to 2.
    [Fix] H.264: Smart editing could pixellate at cut start if PPS values changed from previous segment.
    [Fix] Output: Re-coding an MPEG2 1080i with 1:1 aspect to H.264 1080i @ 16:9 resulted in pillar boxes.
    [Fix] Project files: MP4 AAC, aacAudioSpecificConfig value was not being saved in the project file causing potential joiner issues if project / joiner file was re-opened.
    [Change] SDI output: (VRDPro) SDI options moved from Tools>Options>Playback to it's own page: Tools>Options>SDI Playout
    [Fix] Audio: (VRDPro) Fixed support for Vela Audio. Now correctly ingested as single 1 x 8 channel stream rather than 4 x 2 channel streams.
    [Fix] MXF: (VRDPro) File duration and frame count are being reported as one extra frame.
    Last edited by DanR; December 8th, 2017 at 05:24 PM.
    Dan Rosen ( VideoReDo )

  2. #2
    Join Date
    Feb 2004
    Posts
    12,043
    Blog Entries
    7

    Default

    TVSuite V5 - 5.1.2.731 (Released 2015-05-30)
    ============================================
    [Fix] Output profile: Setting profile to manually adjust audio gain not working.

    TVSuite V5 - 5.1.1.730 (Released 2015-05-22)
    ============================================
    [Change] Output: Frame rate converter didn't work with joiner or DVD output if there was a mix of frame rates.
    [Change] Private: Enable debugging by going to capture frame, changing the file name to "debugging", and then shift+Cancel.
    [Fix] WMV: Saving to WMV will crash if source isn't MPEG2 or H264 and no audio recode or video cropping being performed.
    [Fix] Captioning: When recoding from MPEG2 to progressive H.264, NTSC captions repeat frame flags will cause caption corruption.
    [Fix] MKV output: MKV output could fail with ffMpeg write packet error if a DVB subtitle stream had an invalid PTS.
    [Enhancement] Audio: (VRDPro) Add SMPTE-302M and Dolby E pass through support for H.264
    [Fix] H.264: (VRDPro) Smart editor could trigger a crash in x264 4:2:2 encoder.
    [Fix] Audio output: (VRDPro) Problems setting peak db on advanced profile dialog.
    [Fix] Audio output: (VRDPro) when recoding to SMPTE-302M, volume was being raised by 6 db.


    TVSuite V5 - 5.1.1.729 (Released 2015-05-14)
    ============================================
    [Change] Audio mixing: (VRDPro) create pseudo AES channel Ids for non-SMPTE streams so we can use the same stereo profiles.
    [Fix] Batch: Yellow exclamation Icon not properly showing errors in Batch output list.
    [Fix] GUI: Frame capture not working properly on 4K material. Cuts off image if image width is > 2048 pixels.
    [Fix] H.264: QSF could stall or crash if time stamp wrapped by more than 4 seconds.
    [Fix] H.264: PTS calculation routine was looking at the max_pic_order_cnt_lsb for the next GOP rather than the current GOP.
    [Fix] Captioning: When recoding from MPEG2 to H.264, NTSC captions could cause application crash if converting from 1080 to 720.
    [Fix] Output: WMV/VC-1 output didn't work
    [Fix] Output: (VRDPro) Crop and border bottom doesn't work if both values are the same.


    TVSuite V5 - 5.1.1.728 (Released 2015-04-26)
    ============================================
    [Fix] Audio output: (VRDPro) When advanced mixing from 5.1 source to PCM, LFE channel not being correctly counted as a source channel.
    [Fix] Captioning: When recoding from MPEG2 to H.264, NTSC captions may be corrupted if any source frames have a repeat field flag.
    [Fix] DVD authoring: Slow recoding, sync errors, and possible TOD if source is 720p with repeat frame flags.
    [Fix] ES Muxing: ES muxing could pick up AAC audio as MPEG1 Layer 2 causing sync errors and dropped frames.
    [Fix] ES Muxing: If output is .TS and one of the audio streams is PCM says audio recode (OK). Remove PCM stream, still says recode.
    [Fix] ES Muxing: Improve ES muxing when output is TS and mux rate is automatic.
    [Fix] H.264: Adding a title and doing a smart edit save would cause a crash. (broke in 727).
    [Fix] H.264: Creating mono HE-AAC silent frames had wrong frame duration. Will now create frame as stereo HE-AAC.
    [Fix] H.264: Save might drop last frame if audio is AAC and there are an odd number of audio frames being output.
    [Fix] H.264: Save will drop frame if last frame of file is a single frame GOP that starts with IDR with POC_LSB = 0.
    [Fix] Output: Audio normalization didn't work when downmixing output.


    TVSuite V5 - 5.1.1.727 (Released 2015-04-02)
    ============================================
    [Enhancement] Captioning: (VRDPro) Added option to display 16x9 with a maximum 42 columns rather than the default 32 column maximum.
    [Enhancement] Captioning: Display and save existing MP4/MOV "tx3g" captions.
    [Enhancement] GUI: Add a "don't show again" to the Queue To Batch confirm pop-up.
    [Enhancement] H.264: Shift+Tools>Options 55. Allow UHD 4096 output. Allows Ultra HD output, must select SAS or type in dimension.
    [Change] GUI: (VRDPro) Tools>Options>Stream parameters "Include initial closed GOP B frames" defaults to enabled (checked) for new installs
    [Change] GUI: Move the the "Encoder quality" from Tools>Options>Stream to Output profile: Advanced: Intelligent Recode Options
    [Change] GUI: Shift+Tools>Options: "Include initial closed GOP B frames" has been moved to Tools>Options>Stream parameters
    [Change] MPEG2: (VRDPro) Support for reading and reporting AFD code in MXF SMPTE-436M ANC packets.
    [Fix] Batch: Disable the "Problem while seeking" message if running from batch.
    [Fix] DVD authoring: Aspect ratio could be wrong when cropping set in DVD dialog
    [Fix] GUI: (VRDPro) AFD code was being displayed on Tools>Show Program Info in non-Pro version.
    [Fix] GUI: If preferred audio set to MPEG1 Layer 2 and file only has AC3 it won't find the audio.
    [Fix] GUI: Video display problem if encoding height was not a multiple of 4, and YUV acceleration is disabled.
    [Fix] H.264: Smart editing could hang if doing audio normalization and IDR frame isn't found at start of first cut.
    [Fix] TiVo: Changed the Tivo filter to use a different read mode so that it won't stall in batch.


    TVSuite V5 - 5.1.1.726 (Released 2015-03-06)
    ============================================
    [Fix] Beta: H.264 Smartediting could fail if no IDR frames found. Broke in 725f.

    TVSuite V5 - 5.1.1.725 (
    Released 2015-03-05)

    ============================================
    [Enhancement] DVD: Add DVD video option to select the Intel QS encoder.
    [Enhancement] GUI: On Tools>Edit>Profile page add a checkbox which will set whether to use the consumer or grid as default. (VRDPro).
    [Enhancement] MKV: Enabled support for DVB subtitles in MKV
    [Change] MPEG2: In rare cases an AC3 streams would not be found even when present.
    [Change] Output: Removed H264Encoder.dll from installation setup/install. Functions consolidated in other files.
    [Change] Profile: Change default profiles to default to 4K.
    [Fix] Batch: output folder does not stick in batch
    [Fix] DVD authoring will crash when enabling QuickSync and re-encoding with mulitple titles.
    [Fix] Files with "&" fail when processing through Batch Manager
    [Fix] GUI: "Add files to batch queue" could fail the first time it's used as the default remembered folder name is blank.
    [Fix] GUI: Double clicking on the time code control would always copy the time code to the clipboard overwriting what was there.
    [Fix] GUI: Old style file dialogs not working in QSF and ES muxer. Old style dialogs enabled via: shift+T>O # 46 (false).
    [Fix] H.264: 608 and 708 caption display could be incorrect if SEI captions were stored by field rather than by frame.
    [Fix] Joiner: When auto restoring after crash, saving the restored joiner with H.264 throws an error, "Compressed stream not found"
    [Fix] MPEG2: VRD will crash in preview if a secondary audio frame isn't found (broke in 724).
    [Fix] Output: It's possible to save to an MP4 with the same name as the source triggering a problem with the MOOV atom rename.
    [Fix] Profiles: Some of the "advanced H.264 stream options" in the profile editor were not being honored, e.g. RemoveFiller NALs.
    [Fix] QSF: Failing when clock is reset near beginning of the file.
    [Fix] QSF: Triggering a QSF with filters from the "Dimension Changed" message box, the "filter" checkbox in QSF dialog isn't checked.
    [Fix] QSF: When filtering by dimensions changes frame rates, the output frame rate is set to first frame rate in the file.
    [Fix] Queue to batch from QuickStream Fix will stall when source and output names are the same
    [Fix] Saving: Save as audio only .m4a not working.
    [Fix] Subtitle display: VRD could crash if user tries to display teletext subs which follow DVB subs in the in the view subtitle menu.

    TVSuite V5 - 5.1.1.724 (Released 2015-02-14)
    =========================================
    [Change] H.264: Process DVB subtitles recorded from ARTEHD which have incorrect timestamps.
    [Change] GUI: Updated Spanish translation.
    [Change] MPEG2: Remove limit for maximum PTS discontinuity checks.
    [Fix] H.264: QSF will drop last frame of file if the last encoded frame is the last displayed frame. Normal save is OK.
    [Fix] GUI: (VRDPro) Pro version is checking consumer version numbers rather than Pro releases.
    [Fix] Batch: Batch wouldn't launch a second time if previously minimized to the system tray and closed.
    [Fix] Profiles: Editing a profile will crash VRD if running Vista or user selected "audio only" and codec wasn't set to "automatic"
    [Fix] MP4 muxing: When doing MOOV atom renaming, some unicode characters can cause logging error and put logging into loop.
    [Fix] GUI: Remove incorrect URL reference (404) in tip of the day to our support page. Replaced with Quick Sync tip.
    [Fix] Output profile: Crash when changing some H.264 encoding options.
    [Fix] GUI: Don't show Tools>Options>Quick Sync options page when running XP or Vista. Prevents crash in Vista.
    [Fix] GUI: Issues with Windows DPI scaling. Improved font readability at high DPI settings.

    TVSuite V5 - 5.1.1.723 (Released 2015-01-23)
    ============================================
    [Fix] Resizer: New multi-threaded resizer would crash if cropping top or bottom of source video.
    [Fix] Output: When converting 1080i to 720p, captions were being doubled up.
    [Fix] Profile: H.264 encoder being set to CBR when source file is also CBR, regardless of bit rate settings,
    [Fix] Batch: Starting batch as minimized wasn't working.
    [Fix] Elementary stream output: Audio file names could have wrong extension when primary audio stream wasn't the first stream in file.
    [Fix] DVD: Audio needs to be forced to 48Khz.
    [Fix] Output: Frame rate changer wasn't honoring MPEG2 3:2 telecine flags.
    [Fix] H.264 output: Converting progressive DVD with 3:2 telecine to 1080p with software encoder created chroma artifacts.


    TVSuite V5 - 5.1.1.722 (Released 2015-01-10)
    ============================================
    [Enhancement] Profile: Frame rate change enabled.
    [Enhancement] Output: Resizer, improved performance of the resizer enabled via shift+T>O> # 36 "Number of threads" to value >=2
    [Enhancement] Video output: Performance enhancements to the smart de-interlacer improves output speed by 20%-40%.
    [Fix] H.264: Preview mode out of sync on 720p video when there are multiple cuts.
    [Fix] Video output driver: Fixed some minor memory leaks each time a new file was opened.
    [Fix] Output: MP4/MKV output muxer not releasing about 60MB of memory after each save.
    [Fix] ffmpeg: Fixed memory leak in the ffmpeg reader when opening a file.
    [Fix] GUI: Intermittent application crash if in preview mode and using fine-tune slider.

    TVSuite V5 - 5.1.1.720 (Released 2014-12-21)
    =========================================
    [Change] COM: Disabled automatic COM registration. COM will only register at install, from batch, or if "/register" on command line.
    [Fix] MP4/MKV: If recoding to H.264 and saving to MP4/MKV, could get a graph abort. Recoding to .ts first, or doing smart edit is OK.
    [Fix] Output: Source frame of 24 fps, being incorrectly converted to 23.97 and also triggering a problem in the frame rate converter.

    TVSuite V5 - 5.1.0.719 (Released 2014-12-15)
    ============================================
    [Fix] H.264: Smart edit crash at cut points when doing IDR recoding and max_l0_active not equal to max_l1_active.
    [Fix] Installer: Program group had a shortcut to older "configuration wizard" instead of new V5 Installation wizard.

    TVSuite V5 - 5.1.0.718 (
    Released 2014-12-12)

    ============================================
    [Enhancement] GUI: TVSuite, Batch and install wizard should now appear in correct perspective regardless of monitor DPI setting.
    [Enhancement] H.264: Added new H.264 advanced encoding option, "Write SEI pic_timing": Default was and still is to write the pic_timing record
    [Change] NPT display: Added shift+Tools>Options, # 35. NPT decimal digits to display: (default is 3). Previously hard coded to 4.
    [Fix] WMV/VC-1: When saving to WMV or VC-1 audio would hiss due to audio bytes being swapped twice.
    [Fix] Batch: Batch add dialog not remembering last used folder.
    [Fix] Profile Default MPEG-2 MP4 profile broken, would convert to MPG rather than save as MPEG-2 in MP4 container.
    [Fix] Profile: AC3 5.0 was forcing an audio recode rather than being passed through because VRD thought 5.0 was illegal.
    [Fix] WTV: QSF a WTV to WTV would always prompt for metadata because it didn't realize the source was WTV.
    [Fix] H.264: H.264 re-coding created files with private SEI that could cause problems when re-opening file in VRD (broke in 717).
    [Fix] H.264: Files transcoded to H.264 in 717 might not be able to be re-opened in VRD due to private SEI causing read exception.

    TVSuite V5 - 5.1.0.717
    (Released 2014-12-04)

    ============================================
    [Enhancement] Audio Output profile: Added option to set byte order (endianess) for PCM audio. Default is "little" same as previous versions.
    [Change] H.264: Show error message that H.264 4:2:2 files require VRD Pro. (even Pro version requires special codec pack).
    [Change] H.264: Updated Mainconcept filters to version 9.9. Should not be noticeable to the user.
    [Fix] Audio recoding: Intermittent error saving and recoding with multiple audio streams due to thread conflict initializing multiple decoders.
    [Fix] DVD authoring: Volume name was incorrect for files with a period in name.
    [Fix] DVD/Joiner: Batch processing or opening of DVD / joiner projects didn't work. Previous joiner / DVD project won't open.
    [Fix] GUI: (Pro only) High contrast skin was not being installed.
    [Fix] GUI: Default audio completion alert wav file "woosh.wav" was accidently left out of the distribution.
    [Fix] GUI: Fixed hidden option # 3, allow resize of fine tune slider.
    [Fix] GUI: Opening a project would set the unsaved edits flag.
    [Fix] GUI: When doing a refresh (F12) video duration was not being updated in the on screen info box.
    [Fix] H.264: ffMpeg error while saving to MP4/MKV when lots of out-of-order frames.

    TVSuite V5 - 5.1.0.716 (Released 2014-11-23)
    ============================================
    [Enhancement] Transport stream: Copy program number from source stream. Only works if "use original PIDs enabled in profile advanced"
    [Enhancement] H.264 streams: Added "Calculate" to Tools>Options>H.264 frame rate mode options to pick up frame rate from video timestamps.
    [Change] GUI: Initial position of VideoReDo screen is now centered in the display.
    [Change] H.264 4K: Enable 4K support now enabled, by default, for new installations. ( # 53, Allow 4k video output: true)
    [Fix] Batch/COM: Batch or COM would crash if Shift + Tools>Options # "41, Show tray icon in silent mode:" was set to true
    [Fix] Subtitle display: DVB and Teletext subs may not display correctly due to uninitialized variable.
    [Fix] Crash during audio normalization
    [Fix] Captioning: 608/708 scrolled captions could overflow caption window size.
    [Fix] ES muxer crash when frame rate unknown.
    [Fix] ES Muxing: Audio stream order in the elementary stream muxer was not always honored.
    [Fix] H.264: Increased buffer size in H.264 encoder to 3 MB to support high bit rate 4K video (previously was 2 Mb)
    [Fix] Upgrade wizard: Enabled previously disabled purchase links.

    TVSuite V5 - 5.1.0.715 (Released 2014-11-13)
    ============================================
    [Enhancement] MPEG2: QSF with filtering will now also filter on frame rates as well as frame dimensions.
    [Change] GUI: If opening a file with RDD11/VANC stream, display warning that only VRD Pro supports RDD11. File will still open.
    [Fix] Transport stream output: MP2 streams which follow a SMPTE-302M stream would have a BSSD registration descriptor copied from 302M.
    [Fix] H.264: Smart cuts could crash WMP v12 if source only had IDR and P frames. Didn't affect all systems.


    TVSuite V5 - 5.0.3.711 (Released 2014-11-08)
    ==============================================
    [Enhancement] GUI: Added two new keyboard shortcuts: Ctrl+Shift+P to "File > Project Save As..." and Ctrl+Shift+Q for "Tools>Audio Adjustment"
    [Change] GUI: Changing audio volume or sync (Tools>Audio Adjustment) enables File>Save>Project
    [Change] H.264: Auto detect and increase the buffer sizes during file open so that playback is smoother.
    [Fix] GUI: About box cutting off product name on XP. Reduced font size by 2 points.
    [Fix] GUI: Tool tips for navigation advance buttons was incorrect.
    [Fix] GUI: Tooltip: "Hint: add + or - for relative offset" appearing in tip of the day.
    [Fix] H.264: If secondary audio stream didn't match the primary audio and needed resyncing with silent audio, output would stall.
    [Fix] H.264: Smart editing could crash on 4K video if the bit rate was so high that a compressed H.264 frame was greater than 1MB.
    [Fix] MP4/MKV output: Allow greater delta between PTS and DTS in case file change to have greater frame reordering than in initial GOP.
    [Fix] Output: Time code burn-in would convert whole frame to RGB, add time code, then convert back to YUV causing color shifts.

    TVSuite V5 - 5.0.3.710 (Released 2014-10-31)
    ==============================================
    [Enhancement] Install wizard: Added option to retain existing custom skin/theme during install.
    [Fix] H.264: QSF filtering wasn't working. Also, QSF would always set filter to first item in drop down box not user's selection.
    [Fix] Increased audio buffers in graph to prevent stall
    [Fix] H.264 joiner: If multiple titles in the joiner before or after a video only the last title before and after were saved.
    [Fix] Profile editor: Audio compression was not retained if setting was set to 0 db.
    [Fix] H.264 smart edit: MP4/Mkv abort on output due to invalid parsing of PPS of Main profile. (Broke in 709)
    [Fix] H.264 MP4/MKV: If frame rate slightly off from standard, was possible for DTS to become greater than PTS.

    TVSuite V5 - 5.0.3.709
    (Released 2014-10-27)

    ==============================================
    [Enhancement] GUI: Trial key for new users. Now prompts and installs the trial key directly from within the application. No more emailed keys.
    [Enhancement] Installer: Uninstaller will now check and warn if VideoReDo or Batch running. Will close batch automatically if not cancelled.
    [Enhancement] Upgrade wizard: Detects if V4 key is on or after 2014-06-01 and creates a no charge Version 5 key. For beta all keys are still no charge.
    [Change] GUI: Tools>Options>QuickSync, moved strings to resource file so they can be translated.
    [Change] H.264 recoding: If recoding to ipad, automatic scene detection was previously enabled by default, Now disabled.
    [Change] Installer: Add option to install folder group to explore the log folder. Can be manually invoked via command line: vrdbatch show_log
    [Change] Installer: If batch detected, attempt to shut it down automatically from the installer.
    [Change] Installer: Remove option to add VideoReDo to start menu as no longer applicable to Windows 8.
    [Change] Output profile: Output profile and file save options will hide QuickSync encoder option if QS not installed.
    [Change] Output status: Updated system tray icon during save to use current VideoReDo icon.
    [Fix] Allow minor variations in detecting PAL frame rates on DVD
    [Fix] Audio adjustment: Changing volume did not force a recode.
    [Fix] Batch: Batch output complete dialog shows wrong icon if an error or warning is detected in a previous file in the batch.
    [Fix] Captioning: Fixed EIA 608 caption bug when switching between roll-up or paint on to pop-up.
    [Fix] Captioning: Fixed overlapping text in 608 caption display.
    [Fix] DVD Project properties: Some DVD options didn't stick.
    [Fix] GUI: When running AdDetective on H.264 file with "Disable display" option selected, cursor wouldn't show progress on the navigation bar.
    [Fix] H.264 MP4: Navigation issue if MP4 source didn't have SPS and PPS for each IDR frame, TVSuite will now copy them from previous IDR.
    [Fix] H.264 Smart edit: Smart edit encoder could crash if PPS. prediction_weighted and doing field encoding.
    [Fix] H.264 smart edit: If default to QS checked and running on a system that allows QS, smart edit would use the V4 cutting engine. Now QS ignored when doing smart cutting.
    [Fix] H.264 smart edit: Not parsing second_chroma_qp_index_offset properly causing an issue with downstream applications.
    [Fix] H.264 smart edit: Output could stall (TOD) if the GOP size was really long. Added shift+Tools>Options 54. Max GOP Length (secs). Default 15 secs.
    [Fix] MP4 output: Possible MP4/MKV PTS/DTS error writing packet when too many reference frames at start of file and using smart edit.
    [Fix] H.264 smart edit: Slight pixelation at start cut point if source is MBAFFand field_pic_flag is set in slice header.
    [Fix] MPEG2: Recoding source file with 1:1 aspect ratio resulted in output file having wrong aspect ratio.
    [Fix] MPEG2: Recoding MPEG2 file where horizontal dimension wasn't evenly divisible by 16 caused scrambled output.
    [Fix] Output profile: Crop/border color change not working. Also changed default from pure black #000000 to studio black #101010.
    [Fix] Output: If QuickSync encoding selected, but system doesn't support QS, automatically switch to software.
    [Fix] Profile editor: Bitrate calculator would crash if edited length was left blank
    [Fix] Profile editor: Crash when using bit rate calculator.
    [Fix] Rounding error when calculating frame rate in files without SPS
    [Fix] TS Muxing: Video PTS being internally converted to unsigned int during muxing. Could affect output files > 2+ hours.

    TVSuite V5 - 5.0.2.707 (Released 2014-09-30)
    ==============================================
    [Enhancement] Output profiles: Encoder type expanded to Default, QS, or Software. Change "Default" from Software to QS via T>O>Stream.
    [Enhancement] 4K support: Added 4K output to shift+Tools>Options>Manual # 53 to allow for testing of output up to 3840x2160. (H264 only).
    [Change] H.264 smart edit: Now works on Windows XP.
    [Change] Quick sync: Encoder initialization error when encoding interlaced material with a height not a multiple of 32.
    [Change] Teletext: Teletext frames would be dropped if there wasn't a PCR. Topfield PVRs drop PCR PIDs.
    [Fix] ES Muxing: Crash / yellow triangle (TOD) when muxing H.264 and audio duration is longer than video. Will now truncate audio.
    [Fix] GUI: 4K video would crash application if brightness or contrast adjustments are altered via View>Change Display Properties.
    [Fix] GUI: Text for new controls is being drawn with CP_UTF8 instead of CP_ACP causing strange characters to be displayed.
    [Fix] H.264 smart edit: Encoder error if number of frames to encode larger than about 30 frames at a cut end.
    [Fix] H.264 smart edit: Slight pixelation at start cut point if source is MBAFFand field_pic_flag is set in slice header.
    [Fix] H.264: Unable to open files that were less than 2 GOPs long. Still unable to join files that are less than 1 second.
    [Fix] MKV: Some MKV source files could have incorrect sync when saved.
    [Fix] MP4/MKV output: Automatically disable SPS/PPS in each GOP option when doing a full recode. Creates more compliant files.
    [Fix] MPEG2: Error parsing AC3 frames in some transport and tivo transport stream files. Broke in 706.


    TVSuite V5 - 5.0.2.706 (2014-09-21)
    ===========================================
    [Change] GUI: Issue error when opening a 4K video if operating system isn't Windows x64. (4K output not supported).
    [Change] Output: Internal change to the frame rate converter when converting from 50/59.94 to 25/29.97.
    [Change] Tools>Intel QuickSync: Show CPU type, display adapters with driver version and date in the QuickSync info box.
    [Change] GUI: Batch, The start / pause button in batch is too obscure, added a label to it and made the button larger.
    [Change] Options: Tools>Options>Playback, remove DirectX option.
    [Change] H.264: Support SBR in MKV/MP4 files.
    [Change] GUI: Cut mode, moved "Cut includes marked out frame" from Shift+Tools>Options to T>O>General to include mark out in cut.
    [Fix] Profile: Audio advanced, single audio source, add 2nd downmix AAC output stream. Edit 2nd stream, shows codec as automatic instead of AAC
    [Fix] GUI: In V5, "Remove selected Scenes/Cuts" not enabled.
    [Fix] GUI: In V5, the thumbnail window doesn't always display properly when a video is opened after startup.
    [Fix] GUI: Beyond TV project file support, which was dropped in previous betas, back into the product.
    [Fix] WTV: Some WTV files would fail to open
    [Fix] COM: Spelling mistakes in vp.vbs
    [Fix] Output: Tools>Audio Adjustment creates static
    [Fix] H.264 Smart edit: When output scene duration less than IDR frame secs and no IDR frame found, wrong start frame output and sync
    [Fix] GUI: Reworked the frame count display logic in the cut list and right side info box to correctly show exact output frame count.
    [Fix] MPEG2: Fixed AFD code detection when the AFD code is in the VANC. Was shifting results by 1 bit instead of 3 bits (VRD Pro only).
    [Fix] H.264: Avermedia frame rate correction not working properly in V5. Was working in V4.
    [Fix] Profile: Rotation direction reversed. Clockwise rotated counter clockwise, etc.
    [Fix] GUI: Showing MBytes into the info box on a Scandinavian system shows weird character instead of space for thousands separator.
    [Fix] GUI: Tools>Options>Playback, unable to persist "Edit without audio"
    [Fix] GUI: Only English shown in the Tools>Options>Startup language selection.


    TVSuite V5 - 5.0.2.705 (Released 2014-09-03)
    ==============================================
    [Fix] H.264 smart edit: New Version 5 H.264 smart cutting engine disabled on Windows XP, will default to Version 4 style engine.
    [Fix] Output: Output would hang for iphone 2 profile, audio gain changed or normalized, and multiple audio streams in source video.
    [Fix] DVD Authoring: Crash if temporary folder on T>O>DVD set to auto.

    TVSuite V5 - 5.0.2.704 ( Released 2014-09-03 )
    ===========================================
    [Enhancement] GUI: Add new menu "Edit>Apply Project file" to apply a project file settings: Cutlist, Scenes, bookmark to currently open video.

    Please take note of the following:
    1. The H.264 cutting engine has been totally re-written, and should perform much better. It can be a bit slow, but I think you'll find the quality of the cuts to be excellent. Obviously we want to hear back from you should you have any issues. If, for some reason, the new cutting engine doesn't work correctly, you can revert to the Version 4 cutting engine, by holding the shift and clicking on Tools>Options and changing the setting for #51, H.264 Smart Cutting Engine.
    2. Batch has been completely re-written as well. You can now add or edit items to the batch queue while encoding or Ad-Detective scans are in progress. On feature I like is the ability to drag a file from the completed batch window back into VideoReDo, or any other application, for editing or viewing.
    3. Documentation, we have not yet updated the help files. This will be coming soon. For COM users, there is a new API, although the old API is still supported for the time being. You can see examples of the updated COM calls in our supplied scripts (*.vbs) that are installed with the application.
    4. Audio completion: After 10 years, we are retiring the Fan Fare sound you hear when a save is completed. If you're nostalgic for the old sound, go to Tools>Options>Completion Alerts and select the "Audio\FanFare3.wav" file.
    5. Lots of other video formats are supported, so please share your experiences with us here.


    I recommend subscribing to this thread to receive email notifications when new betas are posted.
    Last edited by DanR; December 24th, 2015 at 09:56 AM.
    Dan Rosen ( VideoReDo )

  3. #3
    Join Date
    Feb 2004
    Posts
    12,043
    Blog Entries
    7

    Default

    Beta Build 707h has been posted.


    1. 4K (3840 x 2160) H.264 is now supported. It's still in testing so please turn on "shift+Tools>Options>Manual # 53" to allow for 4K output. Feedback appreciated,

    2. You can globally change the default encoder to QuickSync via a check box on the Tools>Options>Stream page. The encoder selection drop down on the profile / options page, now has 3 options: "default, QS, and Software" (previous version just had 2 options, Default and QS).

    3. New Version 5 H.264 cutting engine should work on XP. (this one for you MrV).

    4. H.264 ES muxing fixes when audio is longer than video (another for you MrV).

    Lots of other changes and fixes, so please see release notes above.
    Last edited by DanR; September 30th, 2014 at 12:46 PM.
    Dan Rosen ( VideoReDo )

  4. #4
    Join Date
    Feb 2004
    Posts
    12,043
    Blog Entries
    7

    Default

    Beta Build 709e has been posted.


    1. IMPORTANT: This version requires you to re-install your key or run upgrade the wizard again. We are testing the automatic upgrade process, and for the purposes of this beta, all registered V4 users will be able to run the beta upgrade, without charge. Please see this page for what the upgrade process should look like: http://www.videoredo.com/V5UpgradeNotAvailable.htm
    2. This version supports trial keys. The trial key process has been changed from all earlier releases, all the way back to VideoReDo Version 1. The trial keys are now requested from an in-application web page. No more email required. If you need a trial key emailed to you, please email us at support.
    3. DVD authoring lets you set the encoder type, default, QuickSync, or software from the video projects page. Remember, the Quick Sync encoder does not support dual pass encoding so best quality DVDs at low bit rates will best be served by the two-pass software encoder.
    4. Please see the release notes above for additional information of this release.
    5. We hope this is the last build of the beta period and we can put the product on sale for upgrades within a week.


    Thanks to everyone who has participated in this beta program. We really appreciate your assistance.
    Dan Rosen ( VideoReDo )

  5. #5
    Join Date
    Feb 2004
    Posts
    12,043
    Blog Entries
    7

    Default

    Beta Build 710e has been posted.


    1. Option to retain custom theme at installation.
    2. Bug introduced in 709e would abort MP4/MKV files if H.264 profile was baseline or main. Did not affect High profile. Use Tools>Show Program Info to determine a file's profile.
    3. Fix for multiple titles when saving an H.264 file from the joiner.
    4. See release notes above for complete list.
    Dan Rosen ( VideoReDo )

  6. #6
    Join Date
    Feb 2004
    Posts
    12,043
    Blog Entries
    7

    Default

    Beta Build 711c has been posted.

    1) H.264 buffer sizes will automatically increase at file open to insure smoother playback. Only the first couple GOPs are checked so you still may need manually bump buffer sizes on the Tools>Options>Stream page if playback stutters.

    2) Fixed resyncing logic when 2nd audio stream disappears or starts later than the primary stream.

    3) Fixed 4K cutting crash when the bit rate was so high that the compressed frames were greater than 1 MB in size. Specifically for GoPro 4K sample.

    Please see release notes above for complete list.

    I'm truly hoping that this is the last beta before we go to release. Thanks to everyone who has participated.
    Dan Rosen ( VideoReDo )

  7. #7
    Join Date
    Feb 2004
    Posts
    12,043
    Blog Entries
    7

    Default

    Beta Build 715b has been posted:

    This beta will become the public release in a couple of days. All of here at VideoReDo want to thank everyone who gave such valuable feedback during this long beta period. We really appreciate all of your comments. This is a great user community and it's your feedback and insights that has made the product as rich as is is today. We started this beta in June, hoping to have it released by late July or early August. So much for schedules

    Anyone interested in assisting in translations please let us know. We could especially use an update to our German and French translations.
    Last edited by DanR; November 13th, 2014 at 05:46 PM.
    Dan Rosen ( VideoReDo )

  8. #8
    Join Date
    Feb 2004
    Posts
    12,043
    Blog Entries
    7

    Default

    Beta Build 716a has been posted:

    1. Fixed: Batch crash in trial mode
    2. Fixed: DVB subs and Teletext titles weren't displaying.
    3. Change: 4K support now enabled for new installations. Also increased H.264 encoding buffer size to support compressed frames larger than 2 MB.


    Please see release notes for
    Dan Rosen ( VideoReDo )

  9. #9
    Join Date
    Feb 2004
    Posts
    12,043
    Blog Entries
    7

    Default

    Beta Build 717b has been posted:

    1. Fix to allow joiner and dvd projects to be processed in batch. Old joiner and dvd projects will no longer work.

    Please see release notes for list of changes.
    Dan Rosen ( VideoReDo )

  10. #10
    Join Date
    Feb 2004
    Posts
    12,043
    Blog Entries
    7

    Default

    Beta Build 718b has been posted:

    1. Should fix the H.264 encoding / cutting issues some users had with the 717 MC libraries. Let us know if you still have any issues. We wanted to make 717 a full release, but held off until we could find the source of crashes / file won't open errors.

    Please see release notes for list of changes.
    Dan Rosen ( VideoReDo )

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •