Recent content by MrVideo

  1. M

    Audio is shifted during join

    As seen in the images, the shifting is in the join. I should have been a little more descriptive of the images. Images C1 thru C6 are the cuts, i.e., the remuxes and J1 thru J6 are the locations in the joined file.
  2. M

    Audio is shifted during join

    VRDpro 832f Win7 I first saw the issue in 831a. I have two files, one is 1080p w/ AAC2.0 audio and the other is 720p w/ DD5.1 audio. I can't just mux the audio from the 720p file to the 1080p file because the black lengths are not the same. So, what I did is create elementary stream files of 6...
  3. M

    VRDPro and 720p H.264 editing errors.

    Thanks. That did the trick. A run of the project resulted in no gray frames at the edit locations.
  4. M

    VRDPro and 720p H.264 editing errors.

    Going and looking at the results again, it does look like only the black frames are grey.
  5. M

    VRDPro and 720p H.264 editing errors.

    Not working for me. Both pro and non-pro have the issue. BTW, it is not just black frames that are turned grey.
  6. M

    VRDPro and 720p H.264 editing errors.

    VRDPro 931a - Win7 I've run into a really bad issue. I prefer 1080p, but recently had no choice but to work with 720p. VRDPro doesn't like rebuilding the video at cut locations. The video at the cut points are replaced with grey frames. The number of frames varies. I created a video that is 5...
  7. M

    VRD6Pro hates NBC Network Sat Feed (PTS Underflow)

    Thanks. I thought I had. But, it was the default TS profile. Fixed it now.
  8. M

    VRD6Pro hates NBC Network Sat Feed (PTS Underflow)

    This has been going on for a few versions now. Whenever I edit a TS file, I get a boatload of PTS underflows. A sample file (97MB) that contains a 30 sec trim and the log file is available here.
  9. M

    824a - Requested bitrate ignored

    Source: HEVC - 59.94 - 720p - 4:2:2 - ~10Mbps Wanted: HEVC - 59.94 - 720p - 4:2:0 - 8Mbps 2-pass I tried two different bitrate average settings and the result in both cases was 2Mbps. The setting is being ignored. Plus, I also get PTS underflow errors (2430ms). Why?
  10. M

    Can't read text during output

    Since the enhancement sucked (for those of us with the custom dark skin), how about removing the enhancement so that it goes back to 823a?
  11. M

    Major muxing failure with 824a

    I thought you gave up an the conversion of the MPA streams to AC3. In any event, the muxing issue still needs to be resolved.
  12. M

    Major muxing failure with 824a

    Let me see if I can get a small enough piece that trips it. It is because the original source is from the ABC network feed, which uses MPA files to send the 5.1 audio. I convert those MPA files to AC3 5.1 and need to remux it with the original.
  13. M

    Can't read text during output

    824a. When the output dialog appears, it is black text on a dark gray background. Please put it back so that I can read the progress.
  14. M

    Major muxing failure with 824a

    The TS muxer grabbed about 30 frames of the hevc file and then quit. The log explains it all.
  15. M

    PTS Underflows

    V 823A I'm getting PTS underflows for no apparent reason. There are only 6,143 1080p frames (H.264) in the output (TS). Any clues in the attached log?
Top Bottom